The Refrigerant Leak Sealant is a powerful and reliable solution designed to address small refrigerant leaks in systems. Available in a convenient 6ml size, this product, often referred to simply as Extreme Ultra, is recognized for its ability to locate and permanently seal leaks without reacting to moisture or oxygen. This ultimate leak sealant is polymer-free and repairs leaks up to 0.3mm, making it an essential tool for maintaining the efficiency of HVAC systems.
Key Features:
- Only 6ml can treat systems up to 21kW (6 tons).
- Visible under any UV lamp.
- Non-flammable and works with all refrigerant gases, including R22, R134a, R32, R410A, and R1234yf.
- Permanently Seals Refrigerant Gas leaks both in metal and rubber components of AC/R Systems.
- Non-reactive to humidity and air.
How To Use Extreme Ultra Leak sealant 6ml :
-
Preparation:
- Ensure the system is turned off and properly isolated before applying the sealant.
- Make sure the system is clean and free of debris where the sealant will be applied.
-
System Check:
- Confirm that the refrigerant level is low enough to necessitate the use of a sealant.
- Verify that the system has been properly diagnosed to ensure that a leak is indeed present.
-
Locate the Leak:
- Use a refrigerant leak detector or soap solution to find the exact location of the leak.
-
Warm Up the System:
- If the system has been idle, turn it on and let it run for a few minutes to warm it up. This helps the sealant circulate effectively.
-
Prepare the Sealant:
- Shake the Extreme Ultra 6ml bottle well before use to ensure the sealant is properly mixed.
-
Apply the Sealant:
- Attach the Errecom Extreme Ultra 6ml bottle to the service port of the refrigerant system using a suitable adapter or tool.
- Slowly inject the sealant into the system, following the instructions provided on the product label or by the manufacturer.
-
Circulate the Sealant:
- Allow the system to run for at least 30 minutes to ensure the sealant is fully circulated throughout the system and reaches the leak site.
-
Monitor the System:
- After application, monitor the system for any changes in pressure and listen for any unusual noises.
- Check the leak site to confirm if the sealant has effectively stopped the leak.
-
System Maintenance:
- Regularly inspect the system for leaks and performance issues. The Extreme Ultra Leak sealant should help prevent further leaks, but regular maintenance is essential.
-
Professional Check:
- If the system continues to show issues or if the leak persists, consult a professional technician for a thorough inspection and possible repair.
Product Details:
| Minimum Order Quantity |
1 piece |
| Brand |
Errecom |
| Quantity (Qty) |
6ml |
Click here to Download a pdf with full Details about Our Product Errecom Extreme Ultra:
